| Description | Store |
|
DI-195B |
Price: $295 US |
| Note: We do NOT accept Purchase Orders for the DI-195B. If your order is for this product only, you must pay with a credit card or PayPal. Online Ordering Frequently Asked Questions.
Pricing outside the U.S. will be higher to account for shipping, taxes, duty, currency fluctuation, local warranty and technical support in your country. These starter kits are not CE approved and, therefore, are not available for shipment to European Union countries. |
|
The DI-195B starter kit is a low-cost, two-channel data acquisition starter kit with one important distinction; it features signal conditioned inputs. It offers 12-bit measurement accuracy, a ±5V analog measurement range, up to 240 samples/second throughput, and a convenient serial port interface. Best of all, the signal conditioned inputs allow you to connect to virtually any industrial signal (i.e., VDC, VAC, thermocouple, RTD, frequency, current, potentiometer, strain, etc.) with 600 volt input-to-output islolation.
Our DI-195B starter kit provides a taste of the exceptional power and speed possible with WinDaq software. A free disk demonstrates WinDaq Waveform Browser, our playback and analysis software (just call and ask), but to get a hands-on illustration of the data recording and display capabilities of WinDaq/Lite with signal conditioned inputs, you need the DI-195B starter kit. When connected to your PCs serial port, the DI-195B starter kit allows you to record, display, and analyze data using your own signals. The DI-195B starter kit consists of a two-channel, 3.75 × 6.5 inch A/D module and a serial communications cable, enabling you to connect to the serial port of any PC. The module features two, signal-conditioned, differential, bipolar analog inputs (screw terminal access, maximum measurement range ±5 volts). The kit ships with WinDaq/Lite recording software and WinDaq Waveform Browser playback and analysis software. Data acquisition rates up to 240 samples per second are supported at 12-bits of resolution with WinDaq/Lite software.
The DI-195B derives its power from the included wall outlet-type adapter. Plug it into any 120 volt, 60 Hz AC source.
The DI-195B starter kit includes WinDaq/Lite recording software and WinDaq Waveform Browser playback and analysis software (requires Windows 2000 or higher).
Here you can find extra support for DI-195B. Samples in Visual BASIC, LabView, Visual C++, and Excel are available. Also take a look at the 3rd Party Programming Support.
© 2008 DATAQ Instruments, Inc. All rights reserved. Date last edited 8/10/2006. Contact the Webmaster