| Description | Store |
|
DI-148U-SP |
Price: $99 US |
|
Note: We do NOT accept Purchase Orders for the DI-148U-SP. If your order is for this product only, you must pay with a credit card or PayPal. Online Ordering Frequently Asked Questions. |
|
|
WinDaq/HS-148 |
Price: $195 US |
|
WinDaq/HS-148-EMAIL |
Price: $195 US |
| Note: Pricing outside the U.S. will be higher to account for shipping, taxes, duty, currency fluctuation, local warranty and technical support in your country. | |
Model DI-148U-SP is similar to the general purpose model DI-148U, but is designed to connect directly to as many as two string pots for displacement measurements. Two general purpose inputs are also supported. When used with string pots, model DI-148U-SP provides a complete solution, with a built-in, stable excitation supply that is exposed for each string pot channel.
Like the DI-148U, the DI-148U-SP supports a channel scan list, high sample rate throughput, and a USB interface. These features combine to produce a robust instrument that can be applied to nearly any data acquisition situation where pre amplified signals need to be acquired to a PC, and where displacement measurements using string pots need to be made. Rounding out the products are six bidirectional TTL ports that may be used for general purpose control Sample rates may range from sub Hertz, to 14,400 Hz.
Supports sample throughput rates up to 14,400 samples per second. High Speed version of WinDaq/Lite Recording software is required to reach these high sample rates. WinDaq/Lite is limited to recording rates of 240 Hz throughput.
Connects to any local laptop or desktop PC. Built-in excitation for up to two string pots. Two, built-in, 8 position screw terminal connectors allow easy and secure access to all signal I/O connections without the need for extra options.
The DI-148 is housed in a small plastic enclosure measuring 66D × 66W × 28H mm (2.6D × 2.6W × 1.1H inches).
The DI-148 data recorder starter kit includes WinDaq/Lite recording software and WinDaq Waveform Browser playback and analysis software. An extra cost high-speed acquisition version of WinDaq is available for these products. WinDaq/Lite is limited to recording rates of 240 Hz throughput.
Need a higher Full Scale Voltage range with programmable gain and analog outputs? Then consider our cost-effective DI-158 Series of Starter Kits. The DI-158 Series of products offer more control options with their analog output capability, connect to a wider range of voltages (up to ±64 Volts), have more flexibility with per-channel selectable gain ranges, and has a USB interface. There has never been more power in such a cost-effective instrument.
New! Learn how to use the DATAQ ActiveX controls. Here you can find example programs for Visual Basic, LabView, C++, Visual Studio.NET and more. Also take a look at the Programming Support from UltimaSerial.
© 2008 DATAQ Instruments, Inc. All rights reserved. Date last edited 8/10/2006. Contact the Webmaster