| Description | Store |
|
DI-148U |
Price: $50 US |
|
Note: We do NOT accept Purchase Orders for the DI-148U. If your order is for this product only, you must pay with a credit card or PayPal. Online Ordering Frequently Asked Questions. |
|
|
WinDaq/HS-148 |
Price: $195 US |
|
WinDaq/HS-148-EMAIL |
Price: $195 US |
| Note: Pricing outside the U.S. will be higher to account for shipping, taxes, duty, currency fluctuation, local warranty and technical support in your country. | |
The DI-148U is a PC-based instruments that offers high data acquisition performance for an extremely low price. Each DI-148 has eight single-ended analog input channels with a fixed ±10 Volt full scale range. Analog to Digital conversion resolution is 10 bits, allowing a minimum voltage sensitivity of ±19.5mV. Six bi-directional TTL ports may be used for general-purpose control.
Supports sample throughput rates up to 14,400 samples per second. High Speed version of WinDaq/Lite Recording software is required to reach these high sample rates. WinDaq/Lite is limited to recording rates of 240 Hz throughput.
Two built-in, 8-position screw terminal connectors allow easy and secure access to all DI-148 signal I/O connections without the need for extra options.
The DI-148 is housed in a small plastic enclosure measuring 66D × 66W × 28H mm (2.6D × 2.6W × 1.1H inches).
The DI-148 data recorder starter kit includes WinDaq/Lite recording software and WinDaq Waveform Browser playback and analysis software. An extra cost high-speed acquisition version of WinDaq is available for these products. WinDaq/Lite is limited to recording rates of 240 Hz throughput.
Need a higher Full Scale Voltage range with programmable gain and analog outputs? Then consider our cost-effective DI-158 Series of Starter Kits. The DI-158 Series of products offer more control options with their analog output capability, connect to a wider range of voltages (up to ±64 Volts), have more flexibility with per-channel selectable gain ranges, and has a USB interface. There has never been more power in such a cost-effective instrument.
New! Learn how to use the DATAQ ActiveX controls. Here you can find example programs for Visual Basic, LabView, C++, Visual Studio.NET and more. Also take a look at the Programming Support from UltimaSerial.
© 2008 DATAQ Instruments, Inc. All rights reserved. Date last edited 8/10/2006. Contact the Webmaster