| Description | Store |
Special Discount Bundle Offer |
|
|
DI-730-P |
Price: $2995 US |
|
DI-730-EN |
Coming Soon! |
|
DI-730-USB |
Price: $3195 US |
| Note: Pricing outside the U.S. will be higher to account for shipping, taxes, duty, currency fluctuation, local warranty and technical support in your country. | |
The DI-730 Series is a family of instruments that offers 14-bit, 150kHz waveform recording capability. They communicate through your PC's parallel port in EPP, bi-directional, or standard mode. Other optional communication interfaces include USB and Ethernet.
Use the DI-730 for wide dynamic range measurements, especially those involving AC or DC electric motors. Examples include paper, aluminum, and steel mills, high speed trains, and rail and sea-going locomotion. The high sample rate, exceptional isolation, and CMR characteristics of the DI-730 make it very well suited for the maintenance and troubleshooting of DC drive systems. Other applications include motor/generator RPM measurements, supply voltage and current measurements, and field current measurements from drive-roll, braking, and take-up motors.
DI-730 instruments are available with printer port, Ethernet, and universal serial bus (USB) communication interfaces. All instruments have a 25-pin male printer port connector for EPP, bi-directional, or standard mode parallel port communication with your PC. Options add Ethernet communication capability with a 10base-T Ethernet connector, or a USB port for universal serial bus communication. The optional communication interfaces cannot be used concurrently with the printer port.
Daisy chain multiple DI-720-ENs, DI-722-ENs, and/or DI-730-ENs for a fully synchronous distributed Ethernet Data Acquisition System. Learn more here.
The 8-channel DI-730 Series features a measurement range of ±10mV to ±1000VDC (or peak AC) over six ranges with ±1000V channel-to-channel and input-to-output isolation. Replace entire racks of isolation amps, high & low voltage amps, and data acquisition subsystems with one, portable, lightweight, 9 x 7 x 1.5 inch instrument. Channel-to-channel isolation protects delicate control circuits, computer equipment, and personnel from high common mode voltages.
The DI-730 is widely regarded as one of the most significant PC-based data acquisition developments for 1998 and 1999. It has won the IAN's Editor's Choice Award, Test and Measurement World's Best in Test Award, I&CS's Editor's Choice Award, and was chosen as one of EDN's Hot 100 Products of 1998.
Connect to DC or near DC signals like temperature, generator-based RPM, or other slow process variables. Sample rates well into the sub-Hertz range are possible. Use sample rates as high as 150,000 Hz for high speed applications such as modulated DC drives and other AC waveform situations.
DI-730 instruments apply 16- and 14-bits of resolution (respectively) to your measurement task.
All instruments connect in seconds to your PC's parallel port, Ethernet connector, or USB port using the supplied cable. The DI-730 Series has banana jacks for easy signal connection. Or use the DI-205, DI-705, DI-706, or CABL-4 signal interface options, which provide alternate methods for signal connection.
Expand the analog channel capacity of DI-730 Series instruments now or anytime in the future with our DI-725, a 32-channel analog input expander backpack. Or choose our DI-75B, an eight-channel, signal conditioned analog input backpack that allows the DI-730 to make any conceivable industrial measurement with full isolation. If using the Ethernet interface, string multiple DI-730-ENs together to add more channels, or expand with DI-720-ENs and/or DI-722-ENs to form a distributed synchronous ethernet data acquisition unit (up to 32 instruments).
We provide WinDaq/Lite free with every DI-730 Series instrument purchased without WinDaq/Pro or WinDaq/Pro+ software. WinDaq/Lite is a 16 channel version of WinDaq/Pro that works at the full sample rate of the DI-730 Series instrument, but is restricted to a maximum throughput of 240 Hz when recording to disk. However, if you're interested in WinDaq/Pro+, or if you just want a great deal, we have a great money-saving offer for you.
WinDaq Waveform Browser, our playback and analysis software for Windows, is distributed free with WinDaq/Lite and is included free with every WinDaq/Pro or WinDaq/Pro+ purchase. It is also available for download free-of-charge from this Web site.
© 2007 DATAQ Instruments, Inc. All rights reserved. Date last edited 11/8/2006. Contact the Webmaster
