DATAQ Instruments, Inc.

DI-5001 OEM Printer Port Data Acquisition Board

with FREE WinDaq/Lite Software

250kHz Burst Sampling Rate (EPP), 80kHz Burst Sampling Rate (bi-directional), or 40kHz Burst Sampling Rate (standard parallel port). USB and Ethernet options also available.
Input Range of ?10V Full Scale
32 Single-Ended or 16 Differential Analog Input Channels
WinDaq Software Support
Powered From Any +9 to +36V DC Source
Click here for Dimensional Drawing
For detailed specifications, refer to the DI-720 datasheet.

Description	Store
DI-5001-10 (±10V) 14-bit, 32-channel, OEM printer port data acquisition board with programmable gain factors of 1, 2, 4, and 8 and an input measurement range of ±10 volts full scale. Includes parallel port cable, WinDaq/Lite waveform recording software, WinDaq Waveform Browser playback and analysis software, and the ActiveX Control Library. Physically configured with a power switch, 5-pin DIN power connector, POWER and ACTIVE LEDs, and a 25-pin "D"-type printer port connector.	Price: $995 US Quantity:
DI-5001-5 (±5V) Same as DI-5001-10, but with an input measurement range of ±5 volts full scale.	Price: $995 US Quantity:
Note: Pricing outside the U.S. will be higher to account for shipping, taxes, duty, currency fluctuation, local warranty and technical support in your country.

Product Highlights

The DI-5001 is a fully integrated OEM instrument that provides 32 single-ended or 16 differential analog input channels. The DI-5001 conveniently connects to the printer port of any desktop or portable PC and supports standard, bi-directional, and EPP parallel port modes. Its built-in ADC allows sample rates of once per second to 250,000 samples per second in either triggered or continuous modes. It features two analog outputs with a range of ±10V, and eight each digital inputs and outputs. Signal connections are made directly to the two 40-pin headers. The DI-5001 is offered with your choice of two input measurement ranges: ±10 volts full scale or ±5 volts full scale. Input measurement ranges are as follows:

±10 Volts Full Scale	±5 Volts Full Scale
±10V at a gain of 1	±5V at a gain of 1
±5V at a gain of 2	±2.5V at a gain of 2
±2.5V at a gain of 4	±1.25V at a gain of 4
±1.25V at a gain of 8	±0.625V at a gain of 8

Connect To Any PC

The DI-5001 connects to the standard, bi-directional, or enhanced parallel port (EPP) of desktop, laptop, or notebook PC's. Includes a six foot parallel port cable and adapter. Optional Ethernet and USB interfaces are available.

High-Level Signal Inputs

Each DI-5001 has 32 high-level input channels that can be configured as single-ended or differential on a per channel basis. It also features a jumper selectable measurement range of ±10V full scale or ±5V full scale. Channels are accessed through two 40-pin IDC connectors.

Free Software Support

Each DI-5001 comes standard with a complete software development kit for DOS and Windows. A DLL allows you to integrate the DI-5001 with any Windows program. A number of DOS libraries allow access to DI-5001 hardware through a wide range of DOS programming languages. Also standard is WinDaq/Lite, a free, 16-channel version of WinDaq/Pro that works at the full sample rate of the DI-5001, but is restricted to a maximum throughput of 240 Hz when recording to disk. WinDaq Waveform Browser, our playback and analysis software for Windows, is also distributed free with the DI-5001. It can also be downloaded free-of-charge from this web site.

Additional Software Support

The DI-5001 is also supported by WinDaq/Pro and WinDaq/Pro+ data acquisition software.