| Description | Store |
|
DI-1000TC-4* |
Price: $495 US |
|
DI-1000TC-8* |
Price: $895 US |
| *Note: In order to connect a DI-1000TC to your PC, you will need to purchase an adapter (either DI-1000-USB, DI-1000-232F, or DI-1000-232M, as listed below). If you are planning to daisy chain multiple devices, you only need one adapter. When ordering multiple devices, please specify whether you will be using the instruments individually or interconnected in a "daisy chain." | |
|
DI-1000-USB |
Price: $59 US |
|
DI-1000-232F |
Price: $59 US |
|
DI-1000-232M |
Price: $59 US |
| Note: Pricing outside the U.S. will be higher to account for shipping, taxes, duty, currency fluctuation, local warranty and technical support in your country. | |
DATAQ Instruments' DI-1000TC Series products are a line of instrumentation modules designed for temperature measurements using thermocouples. The unit is provided in 4- or 8-channel versions, and each channel may be configured in software to support one of seven thermocouple types: J, K, T, E, S, B, or R. Temperature measurements may range from -200°C to +1820°C (-328°F to +3308°F), depending upon thermocouple type. Each DI-1000TC thermocouple channel features a panel-mounted, miniature spade connector, and all input channels are electrically isolated from ground and each other up to 1000VDC, or peak AC.
Model DI-1000TC is designed for use across the entire spectrum of temperature measurement applications that use thermocouples. Its small size and wide measurement range make it a perfect temperature measurement device for laboratory applications. Its isolation feature allows it to be used in more demanding industrial applications that experience the large common mode voltages (off-ground measurements) that are typical of grounded thermocouples. Such measurement situations will prevent non-isolated instruments from making a measurement at best, or destroy them in the worst case.
See our page on how to make safe and accurate thermocouple measurements using isolated instrumentation by clicking here.
Multiple DI-1000TC units may be connected individually, or used as expansion units with any combination of other DI-1000 instruments to address any application-specific temperature measurement situation. For example, multiple DI-1000TCs may be connected to each other to provide unique 12, 16, 20, or other thermocouple channel counts. DI-1000TC thermocouple instrument products may also be mixed and matched with other DI-1000 instruments (not yet released) to yield unique measurement configurations that feature various input types (e.g. Simultaneous TC, strain, digital I/O, and voltage) all with sample synchronization.
The built-in RS-422 interface allows DI-1000TC units to connect to any host PC through an inexpensive adapter via an RS-232 or USB port. This interface also serves as an expansion port for other DI-1000 Series instruments (not yet released).
The DI-1000TC's 1000VDC and Peak AC input-to-output and channel-to-channel isolation allows grounded thermocouple measurements.
Allows sharpened decisions with an overall accuracy of ±0.2%, and temperature resolution as fine as 0.08°C.
The DI-1000TC is provided in a small (13.81D × 10.48W × 3.81H centimeters; 5-7/16D × 4-1/8W × 1-1/2H inches) enclosure consisting of an aluminum base and all-steel wraparound.
Those who need a PC-based thermocouple temperature measurement instrument for laboratory or classroom use. Examples include physics, chemistry, biology, and any other discipline that requires accurate and ready-to-run temperature measurements. Those who require a rugged and flexible device for temperature measurements using thermocouples in industrial settings where off-ground measurements are common. Specific applications are temperature measurements in:
We provide WinDaq/Lite free with every DI-1000 Series instrument purchased without WinDaq/Pro or WinDaq/Pro+ software. WinDaq/Lite is a 16 channel version of WinDaq/Pro that works at the full sample rate of the DI-720 Series instrument, but is restricted to a maximum throughput of 240 Hz when recording to disk.
WinDaq Waveform Browser, our playback and analysis software for Windows, is distributed free with WinDaq/Lite and is included free with every WinDaq/Pro or WinDaq/Pro+ purchase. It is also available for download free-of-charge from this Web site.
WinDaq uses the NIST ITS-90 Thermocouple Database for thermocouple linearization.
Use your DI-1000TC with your PDA and get FREE PalmDaq SoftwareWith PalmDaq Software and a DI-1000TC, you can easily turn your PDA into a temperature data logger. In addition, for a limited time, you can get PalmDaq Software FREE with your purchase of a DI-1000.
How does it work? By using an RS-232 docking station for your PDA and a DI-1000-232M adapter, you can hook up your PDA directly to the DI-1000TC. As you collect your temperature data, it will be stored to the internal memory in the PDA. When you're done storing data, hook the PDA up to your PC and press the hot synch button. The file you've recorded will be transferred to the PC in a WinDaq file format. Now it's ready to be played back and analyzed.
It's that easy!
© 2008 DATAQ Instruments, Inc. All rights reserved. Date last edited 7/27/2006. Contact the Webmaster
